Browsing articles in "Free Patterns"
Feb 8, 2016

Cotton Love

Love is in the air this month and hearts in all colors, shapes, and mediums abound.  Get ‘cotton love’ with these adorable double-knit cotton hearts.  Because they work up so quickly, you’ll have time to make one for all of the sweethearts in your life.

hearts_jenny

Knitting Loom: 32 peg loom

Yarn: 100 % cotton yarn in worsted weight.  Peaches & Crème and Sugar n Cream cotton yarns were used in the samples.

Notions: knitting tool, yarn needle, scissors.

Gauge: Not essential for this project.

Size: Approximately 5.5” x 5.75”

Abbreviations:

DZ st – Duplicate Zigzag Stitch

l – left

r – right

 

Techniques2016-02-10 14.06.49

Duplicate Zigzag Stitch:  The Duplicate Zigzag Stitch (DZ st) is worked on both sides of the knitting board/loom.  The wraps will travel at a slight slant.  In this stitch pattern, one peg at the beginning of each row will serve as a sort of turning peg and will not be wrapped.  When working from left to right, the turning peg is the first peg on the lower board.  When working from right to left, the turning peg is the last wrapped peg on the upper board.

Wrapping in DZ st, l-r:  (Working yarn will be at the first wrapped peg on the lower board).  Take the working yarn to the upper board and around the nearest wrapped peg.  Take the working yarn back down to the lower board and around the nearest wrapped peg.  Continue working in this manner until all pegs have a second wrap on them, except the turning peg.

IMG_3386

Knit the pegs that have two wraps on them.

Wrapping in DZ st, r-l:  (Working yarn will be at the last wrapped peg on the upper board).  Take the working yarn down to the lower board and around the nearest wrapped peg.  Take the working yarn back to the upper board and around the nearest wrapped peg.  Continue working in this manner until all the pegs have a second wrap on them, except the turning peg.

IMG_3387

Knit the pegs that have two wraps on them.

 

Work back and forth across the board in DZ st until the knitted fabric reaches the desired length, or as directed in the pattern.

 

Instructions

*This project is double knit.  This means that the project will be worked back and forth, using the upper and lower board of the loom.  Lower board = the rail and pegs closest to you.  Upper board = the rail and pegs farther from you.  The board will not be rotated, so the lower board and the upper board will not change.  For this project, disregard the 2 pegs at each end of the knitting loom.  They are not included in the peg counts for this design.  So, peg one of the lower board would be the first peg on the left hand side of the rail closest to you.

*Work with 2 strands of yarn held together as one throughout this project.

 

Cast On

Make a slip knot and place it on the 7th peg of the lower board.

Wrap the 8th peg on the upper board in a counter clockwise direction.

IMG_3373

Wrap the 8th peg on the lower board in a clockwise direction.

IMG_3374

Wrap the 9th peg on the upper board in a counter clockwise direction.

IMG_3375

Work in DZ st, r-l.  Knit all pegs with 2 sets of stitches on them.

Cast on is now complete.

Bottom of the Heart

Increase #1:

Wrap peg 7 on the upper board in a clockwise direction.

IMG_3379

Wrap peg 6 on the lower board in a counter clockwise direction.

IMG_3380

Work in DZ st, l-r.  Knit all pegs with 2 sets of stitches on them.

Increase #2:

Wrap peg 9 on the lower board in a clockwise direction.

IMG_3382

Wrap peg 10 on the upper board in a counter clockwise direction.

IMG_3383

Work in DZ st, r-l.  Knit all pegs with 2 sets of stitches on them.

Increase #3:

Wrap peg 6 on the upper board in a clockwise direction.

Wrap peg 5 on the lower board in a counter clockwise direction.

Work in DZ st, l-r.  Knit all pegs with 2 sets of stitches on them.

Increase #4:

Wrap peg 10 on the lower board in a clockwise direction.

Wrap peg 11 on the upper board in a counter clockwise direction.

Work in DZ st, r-l.  Knit all pegs with 2 sets of stitches on them.

Increase #5:

Wrap peg 5 on the upper board in a clockwise direction.

Wrap peg 4 on the lower board in a counter clockwise direction.

Work in DZ st, l-r.  Knit all pegs with 2 sets of stitches on them.

Increase #6:

Wrap peg 11 on the lower board in a clockwise direction.

Wrap peg 12 on the upper board in a counter clockwise direction.

Work in DZ st, r-l.  Knit all pegs with 2 sets of stitches on them.

Increase #7:

Wrap peg 4 on the upper board in a clockwise direction.

Wrap peg 3 on the lower board in a counter clockwise direction.

Work in DZ st, l-r.  Knit all pegs with 2 sets of stitches on them.

Increase #8:

Wrap peg 12 on the lower board in a clockwise direction.

Wrap peg 13 on the upper board in a counter clockwise direction.

Work in DZ st, r-l.  Knit all pegs with 2 sets of stitches on them.

Increase #9:

Wrap peg 3 on the upper board in a clockwise direction.

Wrap peg 2 on the lower board in a counter clockwise direction.

Work in DZ st, l-r.  Knit all pegs with 2 sets of stitches on them.

Increase #10:

Wrap peg 13 on the lower board in a clockwise direction.

Wrap peg 14 on the upper board in a counter clockwise direction.

Work in DZ st, r-l.  Knit all pegs with 2 sets of stitches on them.

Increase # 11:

Wrap peg 2 on the upper board in a clockwise direction.

Wrap peg 1 on the lower board in a counter clockwise direction.

Work in DZ st, l-r.  Knit all pegs with 2 sets of stitches on them.

Work in DZ st, r-l.  Knit all pegs with 2 sets of stitches on them.

Work in DZ st, l-r.  Knit all pegs with 2 sets of stitches on them.

Work in DZ st, r-l.  Knit all pegs with 2 sets of stitches on them.

 

Left Curve

Move the stitch from peg 7 on the lower board to peg 6 on the lower board.

IMG_3388

Work in DZ st, l-r until peg 6 on the lower board has been wrapped and peg 7 on the upper board has been wrapped.  Knit all pegs with 2 sets of stitches on them.  (Knit 2 stitches over 1 on peg 6 of the lower board.)

Decrease #1:

Move the stitch on peg 1 of the lower board to peg 2 of the lower board.

Move the stitch on peg 2 of the upper board to peg 3 of the upper board.

Work in DZ st, r-l.  Knit all pegs with 2 sets of stitches on them.  (Knit 2 stitches over 1 on the end pegs.)

Work in DZ st, l-r until peg 6 on the lower board has been wrapped and peg 7 on the upper board has been wrapped.  Knit all pegs with 2 sets of stitches on them.

Decrease #2:

Move the stitch on peg 2 of the lower board to peg 3 of the lower board.

Move the stitch on peg 3 of the upper board to peg 4 of the upper board.

Work in DZ st, r-l.  Knit all pegs with 2 sets of stitches on them.  (Knit 2 stitches over 1 on the end pegs.)

Work in DZ st, l-r until peg 6 on the lower board has been wrapped and peg 7 on the upper board has been wrapped.  Knit all pegs with 2 sets of stitches on them.

Decrease #3:

Move the stitch on peg 3 of the lower board to peg 4 of the lower board.

Move the stitch on peg 4 of the upper board to peg 5 of the upper board.

Work in DZ st, r-l.  Knit all pegs with 2 sets of stitches on them.  (Knit 2 stitches over 1 on the end pegs.)

Work in DZ st, l-r until peg 6 on the lower board has been wrapped and peg 7 on the upper board has been wrapped.  Knit all pegs with 2 sets of stitches on them.

Decrease #4:

Move the stitch on peg 4 of the lower board to peg 5 of the lower board.

Move the stitch on peg 5 of the upper board to peg 6 of the upper board.

Work in DZ st, r-l.  Knit all pegs with 2 sets of stitches on them.  (Knit 2 stitches over 1 on the end pegs.)

Decrease #5:

Move the stitch on peg 5 of the lower board to peg 6 of the lower board.

Move the stitch on peg 6 of the upper board to peg 7 of the upper board.

Knit the stitches on peg 6 of the lower board and peg 7 of the upper board.

Move the stitch on peg 6 of the lower board to peg 7 of the upper board.

Knit the stitch on peg 7 of the upper board.

Cut the working yarn, leaving a yarn tail measuring about 4”.  Using the yarn tail, knit peg 7 of the upper board.  Pull the yarn tail up through the stitch, removing it from the loom.  Pull the yarn tail to tighten and secure this final stitch.  The left curve is now bound off.

Right Curve

Move the stitch from peg 8 on the upper board to peg 9 on the upper board.

Working with 2 strands held together as one, reattach the yarn at the right hand side of the loom, beginning at peg 13 of the lower board.

Work in DZ st, r-l until peg 9 on the upper board has been wrapped and peg 8 on the lower board has been wrapped.  Knit all pegs with 2 sets of stitches on them.  (Knit 2 stitches over 1 on peg 9 of the upper board.)

Decrease #1:

Move the stitch on peg 13 of the lower board to peg 12 of the lower board.

Move the stitch on peg 14 of the upper board to peg 13 of the upper board.

Work in DZ st, l-r.  Knit all pegs with 2 sets of stitches on them.  (Knit 2 stitches over 1 on the end pegs.)

Work in DZ st, r-l until peg 9 on the upper board has been wrapped and peg 8 on the lower board has been wrapped.  Knit all pegs with 2 sets of stitches on them.

Decrease #2:

Move the stitch on peg 12 of the lower board to peg 11 of the lower board.

Move the stitch on peg 13 of the upper board to peg 12 of the upper board.

Work in DZ st, l-r.  Knit all pegs with 2 sets of stitches on them.  (Knit 2 stitches over 1 on the end pegs.)

Work in DZ st, r-l until peg 9 on the upper board has been wrapped and peg 8 on the lower board has been wrapped.  Knit all pegs with 2 sets of stitches on them.

Decrease #3:

Move the stitch on peg 11 of the lower board to peg 10 of the lower board.

Move the stitch on peg 12 of the upper board to peg 11 of the upper board.

Work in DZ st, l-r.  Knit all pegs with 2 sets of stitches on them.  (Knit 2 stitches over 1 on the end pegs.)

Work in DZ st, r-l until peg 9 on the upper board has been wrapped and peg 8 on the lower board has been wrapped.  Knit all pegs with 2 sets of stitches on them.

Decrease #4:

Move the stitch on peg 10 of the lower board to peg 9 of the lower board.

Move the stitch on peg 11 of the upper board to peg 10 of the upper board.

Work in DZ st, l-r.  Knit all pegs with 2 sets of stitches on them.  (Knit 2 stitches over 1 on the end pegs.)

Decrease #5:

Move the stitch on peg 9 of the lower board to peg 8 of the lower board.

Move the stitch on peg 10 of the upper board to peg 9 of the upper board.

Knit the stitches on peg 8 of the lower board and peg 9 of the upper board.

Move the stitch on peg 8 of the lower board to peg 9 of the upper board.

Knit the stitch on peg 9 of the upper board.

Cut the working yarn, leaving a yarn tail measuring about 4”.  Using the yarn tail, knit peg 9 of the upper board.  Pull the yarn tail up through the stitch, removing it from the loom.  Pull the yarn tail to tighten and secure this final stitch.  The right curve is now bound off.

Weave in all yarn ends.

So quick, so fun, make a ton of cotton loves!

Happy

Heart

Day!

 

Leave a comment

     share this post: Share 'Cotton Love' on Delicious Share 'Cotton Love' on Digg Share 'Cotton Love' on Facebook Share 'Cotton Love' on Google+ Share 'Cotton Love' on LinkedIn Share 'Cotton Love' on Pinterest Share 'Cotton Love' on reddit Share 'Cotton Love' on StumbleUpon Share 'Cotton Love' on Twitter Share 'Cotton Love' on Add to Bookmarks Share 'Cotton Love' on Email Share 'Cotton Love' on Print Friendly
Jan 30, 2016

Very Berry Bonnet

 

Very Berry Bonnet side angle b

 

Designed by Bethany A Dailey

**Edited 2/5/16 to add a note to Rnds 7, 10, 13, 16, 19, 22.

**Edited 2/10/16 Brim section to correct remaining number of loops on each long side of the loom to 34 (68 total).

A hat to keep you cozy warm with a vibrantly whimsical flair! This design is unique in that it is styled to be worked from the crown down to create those playful points at the ears.

Knitting Loom: All-n-One Loom, 92 pegs used.

Yarn: Approximately 395 yards of worsted weight yarn. Sample used Universal Yarn Classic Shades (1 skein in Campfire used for main color) 197 yds/180 m., and Patons Classic Wool Worsted (1 skein in Plum Heather used for contast color) 210 yds/192 m.

Notions: knitting tool, 6mm crochet hook (for cast on and help with possible missed stitches, etc), stitch markers, scissors, knitting pins, yarn needle, row counter.

Gauge: 13 sts x 33 rows= 4 inches (in pattern, using U-Stitch)

Finished Measurements: Circumference: 20″, Length from crown to middle brim: 10″ (ear points add 3”)

Skills Needed: Knit/U-stitch, Purl, Drawstring CO, Half Hitch CO (or CO of your choice), and Basic BO, braiding and pompom making.

Abbreviations:
CO: cast on
MC: main color
CC: contrast color
Rnd(s): round(s)
Rep: repeat
K: knit stitch/U-stitch
P: purl stitch
KO: knit off
St(s): stitches
WY: working yarn
HHCO: half hitch cast on
S1: slip one/skip one
BO: bind off

Pattern Notes:
This pattern uses 1 strand of yarn held throughout.

For the sample, all knit stitches were made using the U-stitch. Work whichever type of knit stitch helps you achieve the proper gauge.

Drawstring CO tutorial

Half Hitch CO tutorial

Very Berry Bonnet BInstructions

Set loom to work in the round using 68 pegs, which are centered on the loom. Peg #1 should be at a corner (where the slider and long side meet). Using the Main Color, drawstring cast on to 68 pegs.

Rnds 1-6: *k2, p2, rep from * to end of rnd.

Rnds 7, 10, 13, 16, 19, 22: (*Note: you will be increasing the number of pegs used by 4, at each corner of the pegs currently being used.) HHCO to corner peg just before peg 1 (this will be the new peg #1), k all pegs on 1st long side of loom to 2nd corner, HHCO to next empty peg, k all pegs on slider, HHCO to next empty peg, k all pegs on 2nd long side of loom to 4th corner, HHCO to next empty peg, k all pegs on slider.

Rnds 8, 9, 11, 12, 14, 15, 17, 18, 20, 21: knit all, including newly CO pegs. Move sliders gradually outward to accommodate new sts. (After Rnd 22, there will be 92 pegs filled.)

Rnds 23-28: *k2, p2, rep from * to end of rnd.

Rnds 29-34: * p2, k2, rep from * to end of rnd.

Rnds 35-70: rep Rnds 23-34 a total of 3 times.

Prepare to work in a flat panel using only 12 pegs at each end of the loom. (Pegs 4-1, 5 slider pegs, & pegs 92-90 on first end and pegs 39-41, 5 slider pegs, & pegs 47-50.)

Work the first section of 12 pegs, keeping in the same pattern as before, while decreasing at the center with a k2tog every other row. Expect the decreasing to cause there to be 3 knits or 3 purls together at the center occasionally. When there is only one loop left, cut at 10” for seaming and pull through loop. Repeat procedure with the other side’s 12 pegs.

Brim

Very Berry Bonnet flatThere will now be 34 loops remaining on each long side of the loom (68 total). Prepare to CO to work in as a flat panel in the following method:

Using the Contrast Color, and leaving a 10” tail for seaming later, CO to 92 pegs, centering them on the loom so that the beginning CO loop is at the center of the front long side of the loom. Work all the way around the loom and back to the 2nd center peg of the front long side of the loom. The original loops of this front long side of the loom will NOT be worked in the following rows. These pegs are simply being borrowed temporarily— just work the rows while ignoring those bottom loops. Only the back long side original loops will be worked into the row.

Row 1: s1, *p1, k1, rep from * to back long side with previous sts. Work these sts following the same ribbing pattern, but with 2 loops worked as one (the original loops and the newly CO loops). After these 30 sts are worked, continue around the loom to last 2 sts, k2.

Row 2: s1, *k1, p1, rep from * to last st, k1.

Row 3: s1, *p1, k1, rep from * to last 2 sts, k2.

Rows 4-16: rep Rows 2 & 3.

Rows 17-32: rep Rows 2 & 3, but BO the first 2 sts of each row.

Loosely Basic BO remaining 60 sts. Leave a 14” tail for seaming.

Repeat the same Brim Instructions, but CO starting at the center of the BACK long side, working the original loops from the FRONT long side into the first row.

Finishing

Very Berry Bonnet stitching Very Berry Bonnet- stitching braidCinch the Drawstring CO by pulling carefully but firmly on the yarn tail until the sts are as snug as they will go. Pull tail to inside of hat and stitch around circle to close completely. Knot securely.

Using the long tails of the MC, neatly stitch the edges of the brim to the MC points on each side of the hat.

Create 2 braids by wrapping both the MC and the CC around the loom 6 times. Cut the loops at each end. This will provide 2 sections of 12 strands of yarn. Tie each section with an overhand knot at the top. Divide the sections into 3 groups of 4 strands and braid them together until 4” remain unbraided at the bottom. Secure with another overhand knot.

Pinch the top knot of one of the braids between the back side’s brim at the point section. Take the front side’s brim point and wrap around the back side’s to seal the braid inside. Using the long tails of the CC, stitch the braid and corner flaps securely in place, keeping edges even and tidy. Repeat on the other side. A few hidden stitches can be tucked into the back brim to keep it folded upwards.

Create three pompoms using both the MC and the CC yarns. Secure onto place at the top of the hat, and at the ends of each braid. The overhand knot at the bottom of the braid serves as a place to tie the pompoms to so that they have a better hold.

Weave in all ends and block lightly as desired.

To leave a question or comment for Bethany Dailey, simply add your comments to the section below! :)

8 Comments

  • Can’t wait to get started on this! We are supposed to get up to 14 inches of snow today and tomorrow so I got some great yarn to use! I’m sure I’ll have tons of questions but it looks like an awesome pattern. Thanks!

  • Wow! This bonnet is the perfect project for 14 inches of snow! :D I will be happy to answer any questions you may have, no worries. ;)

    Have fun, Lisa…both with the snow *and* the looming!

  • OK, I’ve done CO and first 6 rows. Struggling with 7. HHCO to just before peg 1 does that mean go all the way around using HHCO? I’m working counterclockwise so maybe that makes a difference?do I need to start over and work clockwise? Told you I would need help! Thanks!

  • Yes, this row was a tad tricky to explain. All you are doing is adding 4 extra pegs, located at each corner of the pegs you are currently using.

    So, in answer to your question…no, you don’t CO all the way around the loom…just *add* the corner peg next to peg #1 before working your way to the next corner peg in line, going the same direction as you have been the whole time. You will then add a peg here too (at the 2nd corner)…and so on, for a total of 4 added pegs, each of these with a HHCO loop. Is that better? :)

  • Thank you! It makes total sense now and I’m on row 12!

  • Yay! Look at you go! :D

    Thank you for your question, as it helped me to know how to word it better. Good feedback is priceless! :)

  • Love the pattern but I must be missing something. After I finished with the first color and am starting the brim I somehow have 34 loops on each side and not 30. Could you please explain what I am doing wrong.

    Thanks!

  • Hi Kristen! :)

    You are exactly correct. Good catch! I have updated the pattern accordingly. Thank you so much for letting me know.

    I can’t wait to see your bonnet when it’s all done! :D

Leave a comment

     share this post: Share 'Very Berry Bonnet' on Delicious Share 'Very Berry Bonnet' on Digg Share 'Very Berry Bonnet' on Facebook Share 'Very Berry Bonnet' on Google+ Share 'Very Berry Bonnet' on LinkedIn Share 'Very Berry Bonnet' on Pinterest Share 'Very Berry Bonnet' on reddit Share 'Very Berry Bonnet' on StumbleUpon Share 'Very Berry Bonnet' on Twitter Share 'Very Berry Bonnet' on Add to Bookmarks Share 'Very Berry Bonnet' on Email Share 'Very Berry Bonnet' on Print Friendly
Pages:1234567...51»

Our Buttons

HOT PRODUCTS!

Meet Zippy!

Categories

LKC Magazine

Loom Knitting Magazine